|
|
|
|
|
| |
|
|
| |
|
|
|
| |
 |
MPAK-9279TRAY |
Hard disk drive tray, exclusively for the S12S-X1032 models (identified by a light-green release button). |
|
| |
 |
MPAK-NULLMODEM |
Null Modem, DB9 female to DB9 male, wires swapped |
|
| |
 |
MPAK-RS232 |
RS-232C serial cable, audio-jack to DB9 |
|
| |
 |
MPAK-SERIALDB9Y |
Serial port Y-cable for dual-controller subsystems, 2 audio jacks -to- 1 DB-9; maintenance-free during controller failover/failback |
|
| |
 |
MPAK-SAS1M |
SAS external cable, MiniSAS 4X(SFF-8088) to Infiniband 4X(SFF-8470, thumbscrew type), one meter |
|
| |
 |
MPAK-9272TRAYDMY |
Dummy Drive tray, Type-II bezel |
|
| |
 |
MPAK-9275BBU2 |
Battery cell pack, Li-Ion, for ES 2U-R subsystems, BBU ID, high capacity |
|
| |
 |
MPAK-UPSDB9 |
UPS cable, audio-jack to DB9 |
|
| |
|
MPAK-UPSDB9Y |
UPS Y-cable, 2 audio jack-to- 1 DB-9 |
|
| |
 |
MPAK-9279RAIL |
Enhanced rackmount bracket assembly for EonStor S12S-X1032 2U series subsystem, 23 to 36 inches rack depth |
|
| |
 |
MPAK-9279TRAY2 |
MUX board; for using SATA-II (3Gbps) disk drives in a dual-controller S12S-R1032 |
|
| |
 |
MPAK-512DDR |
512MB DDR DIMIM module for all EonStor subsystems |
|
| |
 |
MPAK-1GBDDR |
1GB DDR DIMIM module for all EonStor subsystems |
|
| |
 |
MPAK-2GBDDR |
2GB DDR DIMIM module for all EonStor subsystems |
|
| |
 |
|
| |
|
|
| |
 |
MPAK-9279TRAY3 |
Drive tray with a pre-installed MUX board |
|
| |
 |
MPAK-9279PS |
Power supply module for EonStor 2U series, ASIC400 S12S-X1032 series subsystems, 530W capacity |
|
| |
 |
MPAK-9279FAN |
Cooling fan module for EonStor, ASIC400, and 2U-profile S12S-X1032 series subsystems |
|
| |
 |
MPAK-9275BBU |
Li-Ion battery module |
|
| |
 |
MPAK-R1254/CONTROLLER |
SAS to SAS RAID controller module, 2 x SAS host ports + 1 SAS expansion port, RAID 6, for dual-controller S12S-R1032, w/ 512MB memory |
|
| |
|
|
| |
Return to Top |
|
| |
|
|
